Supplied
is enough hose to replace the vacuum and coolant overflow hoses on the average
2000+ Eclipse. Your kit includes:
Standard Larson Hose Kit $35Specify: Red, Blue, Purple or Yellow |
 |
|
Size |
Length |
Use
(approximate length) |
|
10
mm |
12” |
10”
Coolant overflow bottle outlet |
|
8
mm |
78” |
21”
Coolant overflow bottle inlet 10”
Front valve cover to intake manifold 7”,
2”, 9” Purge control
solenoid 17”
Purge control at throttle body 9”
Front PCV valve |
|
4
mm |
60” |
21”
Cruise control vacuum hose 24”
Misc. solenoids 14”
Misc. @ throttle Body |
Wavmixer Full Hose Kit $54Specify: Red, Blue or Silver (purple is shown but no longer available) |
 |
|
Size |
Length |
Use
(approximate length) |
|
10
mm |
12” |
10”
Coolant overflow bottle outlet |
|
8
mm |
120” |
21”
Coolant overflow bottle inlet 10”
Front valve cover to intake manifold 7”,
2”, 9” Purge control
solenoid 17”
Purge control at throttle body 9”
Front PCV valve 36”
Hood prop rod |
|
6
mm |
72” |
72”
Throttle Cable (hose needs to be slit to cover the cable) |
|
4
mm |
100” |
21”
Cruise control vacuum hose 24”
Misc. solenoids, Fuel pressure regulator 14”
Misc. @ throttle Body 40”
Windshield Washer Hose |
To
install these hoses, remove one hose at a time. Match up the appropriate size
from the supplied silicone hose, and cut to length. Install the silicone hose in
the place of the original hose. Re-use any hose clamps.
If
you are covering the hood prop rod or the throttle cable, you will need to slice
the hose (and not any fingers J)
lengthwise. Slip the hose over the part being covered. You may want to use a zip
tie to secure the ends of the hose.
Road
Race Engineering
13022 La Dana Ct. Santa Fe Springs, Ca 90670
(562) 777-1522 Fax
(562) 777-1562
www.roadraceengineering.com