Inspect Motor For Purchase

• Transmission mounting area at front lower broken, welded ok
• Transmission mounting area at rear upper broken, welded ok but stud is stuck in and wont come out, it will be a problem to remove the transmission in the car
• Rods are stock, maybe balanced. Not Crower
• Pistons are J&E
• Motor building trash in oil pan, junk in oil strainer pick up
• Inspected one rod journal, journal re ground nice, bearing is scored from debris
• Inspected one main journal, re ground nice, journal and bearing has a radial scratch
• Timing belt is new, cover is missing many bolts
• Motor mount to block (under timing cover) is missing one nut
• Head is re-conditioned, not new. Re surfaced at least once
• Valve guides a little loose
• Valve cover bolts are all mismatched, two holes stripped
• Cam journals not perfect but _OK_
• Intake manifold is on, TB is included, Stock injectors, missing TPS
• Stock re surfaced flywheel
• Crankshaft shows no signs of additional  balancing, not lightened
• Balance Shafts are NOT removed

Mike Welch
Road Race Engineering