RRE EVO Parts

RRE DIY Parts

Order Form

Credit Card Usage and Shipping Info

 

RRE EVO 9 Staged Packages

 

Stage One Parts
~300-310 WHP 91 Octane (With Tuning)

Part Parts Price Install/Labor
Cosworth Panel Filter $  43 Inc
Walbro 255 LPH Fuel Pump $  90 $80
RRE Stealth Exhaust (Cat Back) $490 $40
Straight Pipe (no cat) $150 Inc
MXP Down Pipe $220 $40
 
Total $1050 $240

 

 

Additional Stage 1.5 Parts
~330-340 WHP 91 Octane
~390-420 WHP E-85

Part Parts Price Install/Labor
RC Engineering 1000cc Injectors $360 $80
Cosworth Cams M2 or M3 Grind $580 $320
ARP Head Studs $110 $80
RRE Upper/Lower Intercooler Piping Kit $325 $80
ETS 3.5" Intercooler Kit $595 $160
 
Total $1970 $720

 

 

Additional Stage 2.0 Parts

Part Price Install/Labor
Stock Frame Turbo Upgrade $ Varies $ Varies
Example:

CBRD BBK Full
~370-380 WHP 91 Octane
~475 WHP E-85

$1940 $400

 

 

Additional Stage 2.35 Parts

Part Price Install/Labor
GT 35 Turbo Upgrade $ Varies $ Varies

Example:

ETS GT-35, Equal Length tubular manifold, external dump Tial 38mm wastegate, intake

~420 WHP 91 Octane
~550 to 600 WHP E-85 (limited by injector size)

$3900 $500
 
Cosworth Single Springs And Retainers
(Needed for higher than stock rev limit to fully utilize bigger turbos)
$300 +$300 (if done at time of cam install)

 

Dyno Tuning

Dyno Tuning is required after Stage 1.0 and at anytime after major changes.

 
 
Single Map Tune $500
 
Dual Map Tune

Tune for any 2 fuels. Example:
91/100       91/Q-16
91/E-85     87/E-85

  $600
(plus 2nd fuel costs)
 
Retune for major parts changes   $300+
Retune for minor parts changes   $150 to $250
 
Add a second map to one of our single maps
w/switch install and wiring
  $300
 
Suggested Boost Control Options For Single or Dual Maps:
 
ECU Boost

(1) RRE 3 Port Boost Solenoid - Higher flow solenoid allows for more precise boost control and helps spool up and allows smaller turbos to hold more boost up top. If you have a Dual Map Tune, it allows the boost to switch at the same time as you change the map.

Optional:

(1) 3.5 bar Map Sensor - bolts to the intake manifold in the same place as the stock pressure sensor and plugs in. Allows for the ECU to accurately control and correct boost. This higher reading MAP sensor is not required for ECU boost, it just allows for error correction.

 

 

   $95 3 Port Solenoid with PNP Harness.

 

  

  

$140 RRE 3.5 bar MAP Sensor with PNP       Harness

 

$60

 

 

 

Additional Track/Reliability Parts

Part Price Install/Labor
Billet Front Engine Mount Only $140 $40
Koyo Aluminum Radiator $590 $80
Setrab Oil Cooler +65% Over Stock Area $295 $300
Oil Cooler Install Parts (SS hose, A-N Fittings, Adapters) $75 Inc
Stoptech 355 Front kit 355/32 $2275 $200
Stoptech Rear Kit 328/28 $2050 $120
Motul 600 C Fluid $30 Inc
Schroth Rally 4 Seat Belt (Driver) $160 $80
RRE Rally Spec Lower Front Chassis Brace $180 Inc

 

 

 

RRE EVO Parts

RRE DIY Parts

Order Form

Credit Card Usage and Shipping Info

Contact Road///Race Engineering

13022 La Dana Ct.
Santa Fe Springs, Ca. 90670
Tel (562) 777-1522     Fax (562) 777-1562
Last updated 1/12