Intake Flanges and Gaskets
|
 |
1G Eclipse BOV Flange
Laser cut steel, bolt holes drilled. 1 1/2" hole in
center
Free stubby piece of 1 1/2" pipe with the right attitude ;-)
|
$10
|
|
1G Eclipse BOV Flange Gasket
|
$4
|
 |
GReddy BOV Flange
Works with GReddy S-Type or R-Type BOVs
Also with HK$ Racing BOVs
Steel, bolt holes drilled. 1 1/2" hole in center
Free stubby piece of 1 1/2" pipe with the right attitude (you
gotta axe for it nice ;-)
|
$8
|
|
Sorry, we only sell BOV flanges for BOVs that actually work
well.
|
Exhaust Flanges and Gaskets
|
 |
Steel 4G63 Exhaust Manifold Flange
1/2" thick steel. All holes drilled. Port size is correct
to match a slightly ported exhaust port.
|
$30
|
|
|
Stainless Steel 4G63 Exhaust Manifold Flange
1/2" thick 304 stainless Steel. All holes drilled. Port size is correct
to match a slightly ported exhaust port.
|
$45
|
 |
Stainless Steel EVO 8 Turbine Inlet Flange
1/2" Thick stainless stainless steel. Bolt holes drilled.
Slightly oversized for match ported turbine housings.
|
$38
|
 |
Stainless Steel EVO 8 Turbine Outlet Flange
Each hole is 2 1/2" diameter. Bolt holes drilled. For
building your own O2 Housing Eliminator down pipe.
|
$38
|
 |
EVO 8 Stock Cat Flange This flange is an exact fit
to the stock cat inlet and outlet. 1/2" thick
laser cut steel, center hole is 2.5" diameter. Bolt spacing
is 4" Allows a 3" pipe to be welded directly to
the flange.
|
$10
|
 |
EVO 8 Stock Cat Gasket
Factory composite metal type
|
$10 |
 |
EVO 8 Muffler Flange
The three bolt flange where the exhaust piping meets the side
of the factory muffler. Allows you to make an easy rear muffler
delete pipe to eliminate the muffler on an EVO 8. 1/2" thick
laser cut steel.
|
$16
|
 |
3" 2 Bolt Exhaust Flange
2 bolt pattern at 4 3/16" spacing (matches RSR, GReddy,
Apex and most Japanese systems)
1/2" Thick steel, laser cut.
|
$12
|
 |
3" 2 Bolt Exhaust Gasket
2 bolt pattern at 4 3/16" spacing (matches RSR and
Apex)
Metal/composite factory type.
|
$10
|
 |
3" 3 Bolt Exhaust Flange
3/8" thick steel, 3 bolt pattern
|
$ 8
|
 |
3" Exhaust flange gasket
Thick composite fiber type
|
$ 2
|
Garrett Turbo Parts
|
 |
TiAL 35mm Flange
/Delta Gate Waste Gate Flange
|
$ 8
|
|
|
TiAL 35mm Flange
/Delta Gate Waste Gate Flange - Stainless steel
|
$12
|
 |
TiAL 35mm Gasket
/Delta Gate Gasket
Fire ring/composite gasket
|
B/O
|
 |
Garrett Oil Drain Flange with 5/8" hose barb fitting
|
$13
|
 |
Garrett Oil Drain Gasket
|
$ 2
|
 |
Garrett T-3 Turbine Housing Inlet Flange
1/2" thick steel
|
$22
|
 |
Garrett T-3 Turbine Housing Inlet Gasket
Single layer stainless steel
|
$ 8
|
 |
Garrett T-3 "Ford Style" Turbine Housing Discharge Flange
Laser cut, 1/2" thick steel, holes drilled. Fits "Ford
style" T-3 turbines.
|
$30
|
 |
Garrett T-3 Turbine Housing Discharge
Gasket
Fits "Ford style" T-3 turbines. |
$15 |
|
Buy 5 or more of any
combination of flanges or
gaskets and get a 20% discount
|
