EVO and Eclipse Turbo Parts and Performance

RRE EVO X Parts Catalog

AEM E-85 Rated Fuel Pump for the EVO X 50-1220

$130 inc Priority Mail 2/3 Day Shipping

The AEM 340 lph drop in fuel pump for the EVO X (AEM part number 50-1220) is currently our go-to fuel pump for the best fit and best reliability. We never had much long term luck with the other drop in pumps for the EVO X. Premature wear and clogged up filters were becoming too common.

We have also seen many stock fuel pumps die, some on the dyno right in front of us. While the stock pump when everything is working perfect will keep up with up to 350 whp on pump gas, once the pump and fuel gets hot some random fuel pressure drop offs become common. This has caused some busted spark plugs and the resultant mess from running lean.

There will be random reviews around the web on other versions of AEM fuel pumps. They are older reviews and “How-To’s” before this EVO X specific pump was available. Some people try to use the Walbro 255 size pumps and they require special expensive adapters that eliminate the fuel filter housing. Look! No filter housing :-P

pump no filter

In addition to running no pick up sock, the car that this pump came out of had no fuel filter under the hood either. He was on his second motor after breaking sparkplugs on his first motor with this setup.

Many people confuse the fuel pre filter on the bottom of the pump for the actual fuel filter. That pick up pre filter is just there to keep swarf out of the fuel pump. You need a proper filter after the fuel pump (miniature inline screen filters don’t count)

pick_up_sock

This means that we prefer to keep the factory filter housing in place and functional. We have also seen some seriously sketchy fuel pump installs. Some by under water basket weavers, many with kinked hoses. Often with the wrong hose not rated for high pressure. Somehow something that seems easy to install ends up making a mess.

x fuel pump underwater backet weaving

The AEM 50-1220 fuel pump also fits several other vehicles besides the 2008-15 EVO X and RalliArt. Here is AEM’s propaganda for all vehicles:

AEM’s 340lph E85-Compatible High Flow In-Tank Fuel Pumps feature robust internal construction that is designed to withstand the low lubricity characteristics of ethanol and methanol fuels, and are tested to work with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline. This physical size of this fuel pump makes it a great replacement for the 2000-’09 Honda S2000, 2000-’05 Honda Civic, 1992-’01 Acura Integra, 2002-’06 Acura RSX, 2002-’15 Mitsubishi Evo, 2002-’07 Subaru WRX, 2013-’15 Subaru BRZ, 2013-’15 Scion FRS and many other popular enthusiast applications (NOTE:The plug wiring may need to be updated for some applications). Its compact, short body design (65mm length) with mounting hooks also makes it ideal in universal applications that have fuel tanks with tight tolerances.

Fuel Pump Drawing 50-1215

The AEM 340lph E85-Compatible High Flow In-Tank Fuel Pump is designed for in-tank mounting on high performance naturally aspirated and forced induction vehicles. It features a compact 39mm diameter that fits most applications and an offset inlet design that eases installation.

all parts

The 320lph E85-Compatible High Flow In-Tank fuel pump includes a wiring harness, pre filter and O-rings. Every AEM 320lph E85-Compatible Fuel Pump is tested to flow 340 lph at 43 PSI before it is packaged for sale.

  • Tested and compatible with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline
  • Designed for high output naturally aspirated and forced induction EFI vehicles
  • In tank design
  • Each pump is tested to flow 340 lph @ 43 PSI
  • Compact body (39mm diameter x 65mm length)
  • Includes pre filter, hose, clamps, flying lead, end cap and rubber buffer sleeve

RRE 3 Port Boost Control Solenoid (3 Port BCS)

What is the best 3 port boost control solenoid for the Mitsubishi EVO? We like this one :-)

It comes complete with silicone hose and zip ties for mounting and securing hoses.  The RRE 3 Port Boost Control Solenoid includes a direct plug in connector to fit the EVO 8/9/X

 

We use these about 8 times a week on all of the cars that we tune in house here at RRE. We find that it is more responsive and smother than the more expensive ones. Solenoids will make some noise when they are clicking so we typically will zip tie the BCS to a hose or wire loom to isolate the possible sound. These can be used with the 3rd port venting or with the air going back in. We typically vent it to keep things simple. Fittings are included to run the BCS either way. Many aftermarket intakes have janky fittings  and tiny nipples that are not well secureds for the vent air to blow back in to the intake. The less you push and pull on those little fittings the better.


ETS EVO X FMIC

Thickness

 

Extreme Turbo Systems Intercooler Only

Mostly we use the 3.5″ core. The 3″ core could work for someone that was going to be stock turbo for life. But then who does that? The 3.5″ FMIC isn’t too big for the stock turbo, yet will still handle easily anything that an upgraded turbo can flow. Even up to 800 whp. Sure a 4″ FMIC will add some flow, but with the trimming required and the extra cost, it is for that 1% of hard core drag racers. We use FMICs from ETS because of the value. There are some with cast end tanks that cost $100 more but in the end make only the same power as an equivalent ETS assembly.

Because we are in California we typically sell them without the “ETS” stencil. Black anodizing is also an option. For stencil and black anodizing please email for pricing and time frame involved. These options can add considerable time to an order. The above prices include standard ground shipping within the lower 48 states. Inquire for shipping

  • Pressure checked at 35 psi.
  • Bolt on design to retain crash beam.
  • Fills the entire grill with core.
  • Stainless steel t-bolt clamps.
  • 4-ply couplers.
  • Includes all mounting hardware.

The obvious tie-in between the UICP and LICP is the ETS EVO X Intercooler.  This unit is a tour de force in efficiency, distribution and flow.  The factory inlet and out locations allow for the inlet and outlet to be at diagonally opposing corners of the core.  This provides the best possible airflow distribution through the core’s height making sure that all charge rows are used effectively.  The Auto CAD drawn end tanks are as smooth as on the previous EVO intercooler with aluminum metal forming that looks more like artwork than end tank.  Between the tanks is any one of our sizing options with 3″, 3.5″ or 4″ intercoolers as BOLT-ON designs behind the factory crash beam and above the factory undertray. 4″ requires trimming and additional fitment.